KYOCERA taskalfa fs-1100 Manual Do Utilizador

Página de 109
OPERATION GUIDE
FS-1100
FS-1300D
870CKGB20008
*870CKGB20008*

Sumário dos conteúdos de características para KYOCERA taskalfa fs-1100

  • Página 1 OPERATION GUIDE FS-1100 FS-1300D *870CKGB20008* 870CKGB20008
  • Página 2: Included GuidesThis Operation Guide is for models FS-1100 and FS-1300D. Note This Operation Guide contains information that corresponds to using both...
  • Página 3 Contents 1 Machine Parts ............................................................................. 1-1 Components at the Front of the Printer .................................. 1-2 Components at the Rear...
  • Página 4ii
  • Página 5Legal and Safety Information Please read this information before using your machine. This chapter provides information on the following topics:...
  • Página 6 Legal Information CAUTION NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION. Notice on Software SOFTWARE USED...
  • Página 7USB This product has been certified by the USB Implementers Forum, Inc. v
  • Página 8 License Agreements IBM Program License Agreement The following declarations have been provided in English intentionally. THE DEVICE YOU HAVE...
  • Página 9For any claim (including fundamental breach), in any form, related in any way to this license, IBM's liability will be...
  • Página 10 agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software...
  • Página 1114. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND...
  • Página 12 Safety Information Laser Notice CAUTION CLASS 3B INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. CAUTION Use...
  • Página 13 Caution Labels The printer bears any of the following labels. Laser inside the printer (Laser radiation warning) FS-1300D FS-1100...
  • Página 14 CE Marking Directive Hereby, Kyocera Mita Corporation, declares that this page printer is in compliance with the essential requirements...
  • Página 15Energy Saving Function This printer comes equipped with a Sleep Mode where printer function remains in a waiting state but...
  • Página 16 Symbols The sections of this guide and parts of the machine marked with symbols are safety warnings meant to...
  • Página 17 Installation Precautions Environment Caution Avoid placing the machine on or in locations which are unstable or not level. Such...
  • Página 18 Power Supply/Grounding the Machine Warning Do not use a power supply with a voltage other than that specified. Avoid...
  • Página 19 Precautions for Use Cautions when using the machine Warning Do not place metallic objects or containers with water (flower...
  • Página 20 If dust accumulates within the machine, there is a danger of fire or other trouble. It is therefore recommended...
  • Página 21About the Operation Guide This Operation Guide contains the following chapters: 1 Machine Parts This chapter explains the names of...
  • Página 22 Conventions in This Guide This manual uses the following conventions. Convention Description Example Italic Used to emphasize a key...
  • Página 23: 1 Machine Parts 1 Machine Parts This chapter identifies machine parts, indicators, and operation panel keys. Components at the Front of the...
  • Página 24 Components at the Front of the Printer FS-1100 3 1 2 4 5 8 7 6 FS-1300D 1 2...
  • Página 25 Components at the Rear of the Printer 11 12 13 14 15 11 Optional Interface Slot Cover 12 USB...
  • Página 26 Operation Panel 1 2 6 3 5 4 7 8 1 Ready Indicator 2 Attention Indicator 3 Toner Indicator...
  • Página 27 Indicators There are six indicators located on the top right of the printer. The indicators are used to identify...
  • Página 28 Keys Refer to the following table for the name and description of the basic functions of each key. Key...
  • Página 29: 2 Loading Paper 2 Loading Paper This chapter explains paper specifications for this printer and how to load paper into the cassette...
  • Página 30 General Guidelines The machine is designed to print on standard copier paper, but it can also accept a variety...
  • Página 31 Minimum and Maximum Paper Sizes The minimum and maximum paper sizes are as follows. For the paper smaller than...
  • Página 32 Selecting the Right Paper This section describes the guidelines for selecting paper. Condition Avoid using paper that is bent...
  • Página 33 Basis weight Basis weight is the weight of paper expressed in grams per square meter (g/m²). Paper that is...
  • Página 34 The moisture content of the paper varies with the relative humidity in the room. When the relative humidity is...
  • Página 35 Special Paper The following types of special paper can be used: • Thin paper (60 to 64 g/m²) •...
  • Página 36 Some label paper is manufactured with an extra margin of top sheet around the edge. Do not remove the...
  • Página 37 Thick Paper Fan the stack of paper and align the edges before loading them in the MP tray. Some...
  • Página 38 Paper Type The printer is capable of printing under the optimum setting for the type of paper being used....
  • Página 39 Preparing the Paper After removing paper from the packaging, fan through the sheets to separate them prior to loading....
  • Página 40 3 Adjust the position of the width guides located on the left and right sides of the cassette. Press...
  • Página 41 Note Do not load paper above the triangle mark located on the width guide. 6 Insert the paper cassette...
  • Página 42 Loading Paper into MP (Multi-Purpose)Tray FS-1300D can load 50 sheets of 11 × 8 1/2" or A4 paper (80...
  • Página 43 FS-1100 4 Align the paper with the paper guides and insert as far as it will go. Note Do...
  • Página 44 When loading envelope, place with the envelope flap closed and keep the printing side face-up. Insert envelope against the...
  • Página 45: 3 Connecting and Printing 3 Connecting and Printing This chapter explains how to start up the printer, print from your PC, and use...
  • Página 46 Connections This section explains how to start up the printer. Connecting the USB Cable Follow the steps as below...
  • Página 47 Installing the Printer Driver According to the instructions of the Installation Guide, connect the PC to the printer and...
  • Página 48 Express Mode When selecting Express Mode, printer driver and fonts are installed. After installting with this mode, the other...
  • Página 49 Custom Mode When selecting Custom Mode, printer port and utilities are changed as necessary. 1 On Installation Method screen,...
  • Página 50 Installing the Printer Driver on Mac OS This section explains how to install the printer driver in Mac OS....
  • Página 51 Printing This section explains the printing procedure from an application software. You can specify the printing settings from each...
  • Página 52 Manual Duplex (For FS-1100 only) Use Manual Duplex if you require printing on both sides of the paper. The...
  • Página 53 5 Load the even pages printed into the paper cassette with the instruction sheet facing up and the arrows...
  • Página 54 Status Monitor The Status Monitor monitors the printer status and provides an ongoing reporting function. It also allows you...
  • Página 55 If an information notification event occurs, the 3D view and an alert sound are used to notify you. For...
  • Página 56 Status Monitor Settings The Status Monitor has two tabs to configure its settings. Use the Preference option to set...
  • Página 57 Appearance Tab The Appearance tab is contains the following items. Enlarge window Doubles the size of the Status Monitor...
  • Página 58 Configuration Tool The Configuration Tool allows you to check and/or change the settings for printers not included in the...
  • Página 59 Status Tab The Status tab displays current information about the device, such as the model name, system firmware, engine...
  • Página 60 Printer Tab The Printer tab allows you to set print processing parameters that are not available in the KX...
  • Página 61 Others Tab The Others tab enables you to configure the printer settings shown below. Item Description Auto sleep Configures...
  • Página 62 Uninstalling Software The CD-ROM lets you remove the printer software. 1 Click Remove Software. The Kyocera Uninstaller appears. 2...
  • Página 63: 4 Maintenance 4 Maintenance This chapter explains how to replace the toner container and clean the printer. General Information 4-2 Toner...
  • Página 64 General Information This chapter describes basic maintenance tasks you can perform for the printer. You can replace the toner...
  • Página 65 Replacing the Toner Container This section explains how to replace the toner container. CAUTION Do not attempt to incinerate...
  • Página 66 3 Take the new toner container out of the toner kit. Shake the new toner container at least 5...
  • Página 67 6 Turn lock lever to the lock position. 7 Close the top cover. Maintenance 4-5
  • Página 68 Cleaning the Printer To avoid print quality problems, the interior of the printer must be cleaned with every toner...
  • Página 69 4 Place the drum unit flat on a clean, level surface. IMPORTANT Do not place the drum unit on...
  • Página 70 8 Return the process unit to its position, aligning the guides at both ends with the slots in the...
  • Página 71 Prolonged Non-Use and Moving the Printer Prolonged Non-use If you ever leave the printer unused for a long period...
  • Página 724-10 Maintenance
  • Página 73: 5 Troubleshooting 5 Troubleshooting This chapter explains how to handle printer problems, understand indicator combinations, and clean paper jams. General Guidelines...
  • Página 74 General Guidelines The table below provides basic solutions for problems you may encounter with the printer. We suggest you...
  • Página 75 Print Quality Problems The tables and diagrams in the following sections define print quality problems and the corrective action...
  • Página 76 Printed Results Corrective Action Faint or blurred printing Check the toner container and if necessary replace. Refer to Toner...
  • Página 77 Understanding Indicators The indicator displays generally fall into one of three categories: normal operation, maintenance and errors (repairs). Click...
  • Página 78 Indicator Meaning The printer is receiving data. Printing resumes when the [GO] is pressed. The printer is printing the...
  • Página 79 Maintenance Indication The table below shows the indicator combinations when user intervention is required. It is assumed that the...
  • Página 80 Indicator Meaning Remedy The toner is running low. Have a new toner container ready. The toner has run out....
  • Página 81 Cleaning Paper Jams If paper jams in the paper transport system, or no paper sheets are fed at all,...
  • Página 82 General considerations for clearing jams Bear in mind the following considerations when attempting paper jam removal: CAUTION When pulling...
  • Página 83 Paper Cassette/Paper Feeder 1 Pull out the cassette or optional paper feeder. 2 Remove any partially fed paper. IMPORTANT...
  • Página 84 Duplexer Paper is jammed in the duplex section. Remove the jammed paper using the procedure given below. 1 Pull...
  • Página 85 Inside the Printer 1 Pull the paper cassette all the way out of the printer. Remove any partially fed...
  • Página 86 5 Return the drum unit to its position, aligning the guides at both ends with the slots in the...
  • Página 87 Rear Cover 1 Open the rear cover and remove the jammed paper by pulling it out. CAUTION The fuser...
  • Página 885-16 Troubleshooting
  • Página 89: 6 Option 6 Option This chapter explains the options for this printer. General Information 6-2 Expansion Memory Modules 6-3 Paper Feeder...
  • Página 90 General Information The printers have the following options available to satisfy your printing requirements. Note Install the memory module...
  • Página 91 Expansion Memory Modules To expand the printer memory for more complex print jobs and faster print speed, you can...
  • Página 92 Installing the Memory Module 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove...
  • Página 93 7 The memory module is secured to the memory socket with the clamps. 8 Reinstall the memory slot cover...
  • Página 94 Paper Feeder (PF-100 ) The PF-100 allows you to add one (for FS-1100) or two (for FS-1300D) more paper...
  • Página 95 Network Interface Card (IB-23) The network interface card supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, so that the printer...
  • Página 96 CompactFlash (CF) Card The printer is equipped with a slot for a CF card with the maximum size of...
  • Página 97 4 Insert the CF Card. 5 Secure it with the screws removed in step 3. 6 Connect the power...
  • Página 986-10 Option
  • Página 99: 7 Appendix 7 Appendix This section lists the specifications of this printer. Specifications 7-2 Environmental Standard Requirements 7-4 Appendix 7-1
  • Página 100 Specifications Note These specifications are subject to change without notice. Description Item FS-1100 FS-1300D Type Desktop Printing Method Electrophotography,...
  • Página 101 Description Item FS-1100 FS-1300D Continuous printing 1 to 999 sheets Resolution Fine 1200 mode, Fast 1200 mode, 600 dpi,...
  • Página 102 Environmental Standard Requirements This machine conforms to the following environmental standard requirements. • Time for switching to Sleep mode...
  • Página 103Index A Expansion memory module option ........................................................................6-2 Express mode Adhesive label ................................................................. 2-7 installation method ....................................................3-4 Attention indicator operation panel...
  • Página 104 components ..............................................................1-2 Paper cassette loading paper ..........................................................2-14 clearing paper jams ................................................ 5-11 minimum and maximum paper sizes ........................2-3 minimum...
  • Página 105USB interface connector components .............................................................. 1-3 Tips .................................................................................. 5-2 Understanding indicators ................................................. 5-5 Top cover components .............................................................. 1-2 Toner container...
  • Página 106Index-4
  • Página 107E1
  • Página 108
  • Página 109 Çalıştırma Kılavuzu KM-2560 KM-3060 TURKEY
downloadlike
ArtboardArtboardArtboard