KYOCERA taskalfa fs-1100 Manual Do Utilizador

Troubleshooting

5-7

The table below shows the indicator combinations when user 
intervention is required. It is assumed that the printer is online and is 
processing data.

There is no paper in the cassette, 
MP tray, or Manual Feed.

Load paper into the paper source.

The cassette is not inserted 
properly.

Insert the cassette fully into the printer.

The top cover is open.

Close the cover.

There is no cassette in the paper 
feeder or the cassette specified as 
a paper supply is not inserted 
properly.

Re-insert the cassette and then try 
printing again.

The process unit or toner 
container is not installed.

Install the process unit or toner 
container.

The cassette does not contain the 
paper specified by the printer 
driver.

Load the paper into the cassette (#[1 or 
2]) and then restart printing. You can 
change the paper source by pressing 
the 

[GO].

The paper sizes do not match.

If the paper size in the paper source 
differs from the paper size and type 
specified by the printer driver, you can 
print by supplying paper from the MP 
tray or Manual Feed. Load the correct 
paper size and type into the MP tray or 
Manual Feed and press 

[GO] to begin 

printing.

If you want to supply paper from a 
source other than the MP tray or 
Manual Feed, you can change the 
paper source by pressing 

[GO].

If the paper fed from the MP tray or 
Manual Feed is a different size from the 
specified paper size, a paper jam will 
occur.

A paper jam occurred during 
printing.

Open the printer cover and remove the 
jammed paper.