Konica Minolta bizhub c650 Manual Do Utilizador

Using copy functions

2-12

C650

Usin

g co

py fu

nct

ions

Chapter 2

The type of document and copy can be specified.

The following document and copy settings are available.

*1

If “1 > 2” or “2 > 2” is selected, specify the binding margin position for the 
copy and the orientation of the loaded document, otherwise the copies will 
not be printed as desired.
For details on specifying the document orientation, refer to "Selecting the 
document orientation (Original Direction settings)" on page 1-18.

*2

If “2 > 1” or “2 > 2” is selected, select the position of the binding margin 
and the orientation of the loaded document, otherwise the copies will not 
be printed as desired.
For details on specifying the document orientation, refer to "Selecting the 
document orientation (Original Direction settings)" on page 1-18.
For details on specifying the binding margin position of the document, refer 
to "Selecting the position of the binding margin (Original Binding Position/
Binding Position settings)" on page 1-20.

!

When the document is scanned from the original glass using the “1 > 2”, “2 > 1” 
or “2 > 2” settings, the scanned pages are stored and printed together.

Follow the procedures described below to select document and copy settings.

1 > 1

Select this setting to produce single-sided copies from single-sided 
documents.

1 > 2

*1

Select this setting to produce one double-sided copy from two single-
sided documents.

2 > 1

*2

Select this setting to produce two single-sided copies from one double-
sided document.

2 > 2

*1*2

Select this setting to produce double-sided copies from double-sided 
documents.