Directed Video HVM500 Manual Do Utilizador

© 2001 Directed Electronics, Inc.  

Any changes in the following menus must be written into the MCB1000 and ESP/ESP2
software. Before the menu is exited the Write to System procedure must be completed.

PASSIVE/ACTIVE ARMING

Program the ESP/ESP2 security system to arm by itself 
(passive) or if its remote must be used for arming 
(active). For a full description of this setting refer to 
your ESP/ESP2 owner’s guide.

CHIRPS ON/OFF

This feature will turn the arming and disarming chirps 
on/off. For a full description of this setting refer to the 
ESP/ESP2 owner’s guide.

IGNITION LOCK ON/OFF

When turned on, the doors will lock three seconds after 
the ignition is turned on. For a full description of this 
setting refer to the ESP/ESP2 owner’s guide.

IGNITION UNLOCK ON/OFF

When turned on, the doors will unlock when the ignition 
is turned off. For a full description of this setting refer 
to the ESP/ESP2 owner’s guide.

PASSIVE/ACTIVE LOCKING

This feature controls whether the doors will lock when 
the ESP/ESP2 security system passively arms itself. For a 
full description of this setting refer to your ESP/ESP2 
owner’s guide.

WRITE TO SYSTEM

■

Highlight WRITE TO SYSTEM, press the monitor’s 
MODE button or the remote's MENU button to 
enter the system changes.

■

WRITING TO SYSTEM will be displayed.

■

WRITE SUCCESSFUL - Information entered successfully.

■

WRITE FAILED - Information not entered successfully.

POWER AUTO OFF

■

Select to choose POWER AUTO OFF or POWER LAST STATE.

■

POWER AUTO OFF - When the key is turned on the 
system power will remain off, regardless of the sys-
tem on/off state when the key was turned off. 

■

POWER LAST STATE - When the key is turned on the 
system will automatically return to the power 
on/off state it was in when the key was turned off.