Jacuzzi j-300 j-335 Manual Do Utilizador

33

Periodically, the filter cartridge will need a more thorough cleaning to 

remove imbedded oils and minerals. For this, we suggest cleaning as 

illustrated in step “F”, followed by soaking the filter overnight in a plastic 

container filled with a solution of water and specially formulated filter 

cleanser available from your authorized Jacuzzi dealer. The average life 

expectancy of each filter is approximately two years with proper care and 

water quality maintenance. Replacement cartridges may be purchased 

from your authorized Jacuzzi dealer.

About every 3 months, you will want to replace the spa’s water. The 

frequency depends on a number of variables including the amount of 

use, attention paid to water quality maintenance, etc. You will know it is 

time for a change when you cannot control sudsing and/or you can no 

longer get the normal feel or sparkle to the water even though the key 

water balance measurements are all within the proper parameters.

ING” (page 35). On the other hand, if it is hot outdoors, do not leave 

1.  Turn off power to spa at breaker. 

2.  Locate the drain valve on the front/lower plastic 

pan. Hold the larger (rear) body to prevent 

it from turning, then loosen and remove the 

front cap to expose the underlying male hose 

threads.

3.  Attach a garden hose to the exposed threads.

4.  Gently rotate the larger (rear) valve body 1/3 

turn counterclockwise to unlock the drain valve.

5.  Pull the larger (rear) body outward to open drain.

6.  After the spa drains, perform steps 2-5 in 

reverse order to close the drain prior to refilling 

the spa.

After refilling, turn on power to the spa and follow the steps listed under 

“Spa Fill Up Procedure” (page 18). Always fill your spa through both filter 

wall fittings.

Open Drain

2.

3.

4.

5.

Unlock
Drain

1.  Turn off power to spa.