Nortel Networks 2212 Manual Do Utilizador

Página de 61
Chapter 5 Troubleshooting
45
WLAN IP Handset 2210/2211/2212 User Guide
Bad Network IP
The WLAN Handset is configured wrong. Contact your system administrator.
Bad Network Mask
The WLAN Handset is configured wrong. Contact your system administrator.
Bad Payload Type
There may be a configuration problem 
with the handset of the VPN server.
Contact your system administrator.
Bad Phintl File
The WLAN Handset software download 
files are incorrect or corrupted.
Contact your system administrator.
Bad Program File
The WLAN Handset software download 
files are incorrect or corrupted.
Contact your system administrator.
Bad Preshared Key
The WLAN Handset is configured wrong. Contact your system administrator.
Bad Tunneled IP
The WLAN Handset is configured wrong. Contact your system administrator.
Bad VPN Server IP
The WLAN Handset is configured wrong. Contact your system administrator.
B
 or 
A
 icon
Battery Low
 message
and beep
Low battery
In call: the battery icon (
B
) displays 
and a soft beep is heard when the user is 
on the WLAN Handset and the battery 
charge is low. User has 15–30 minutes of 
battery life left.
Not in call: The battery icon (
A
displays whenever the battery charge is 
low. The message 
Low Battery
 and a 
beep indicate a critically low battery 
charge. The WLAN Handset will not work 
until the battery pack is charged.
Battery Failure
The battery pack is not functioning.
Replace the battery pack with a new or 
confirmed Nortel battery pack. Any 
non-Nortel battery packs will not work.
Battery Failed
The battery pack is damaged or 
incompatible with the WLAN Handset.
Replace the battery pack with a new or 
confirmed Nortel battery pack. Any 
non-Nortel battery packs will not work.
Can’t Renew DHCP 
yyy.yyy.yyy.yyy
The DHCP server is not responding to 
the initial renewal attempt.
Record the error information and contact 
your system administrator.
Charging … 
The WLAN Handset is charging in the 
Desktop Charger.
No action needed.
Charge Complete 
The WLAN Handset is now fully charged. No action needed.
Checking Code 
The WLAN Handset is checking for a 
newer version of software that should be 
downloaded.
None. This message lasts for 
approximately one second. If message 
remains displayed, power off the WLAN 
Handset and contact your system 
administrator.
Checking DHCP IP
The WLAN Handset is retrieving DHCP 
information from the DHCP server.
None. This is informational only.
CRC Code Error
The software which has been TFTP 
downloaded has a bad redundancy code 
check.
Contact your system administrator.
Code Mismatch!
The software loaded into the WLAN 
Handset is incorrect for the handset 
model.
Contact your system administrator.
Table 5   WLAN Handset messages, descriptions, and actions
Message
Description
Action