Netgear WG302 Manual Do Utilizador
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
3-11
Basic Installation and Configuration
September 2004
How to Log In to the WG302 Using Its Default IP Address
1.
192.168.0.228 is the default IP address of your access point. The WG302 is set, by default, the
DHCP client to be disabled.
Note: The computer you are using to connect to the WG302 should be configured with an IP
address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
DHCP client to be disabled.
Note: The computer you are using to connect to the WG302 should be configured with an IP
address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
2.
Open a Web browser such as Internet Explorer or Netscape Navigator.
3.
Connect to the WG302 by entering its default address of
http://192.168.0.228
into your
browser.
4.
A login window like the one shown below opens:
Figure 3-6: Login window
Log in use the default user name of admin and default password of password.
Once you have entered your access point name, your Web browser should automatically find
the WG302 Access Point and display the home page, as shown in
the WG302 Access Point and display the home page, as shown in
“Login result: WG302 home
page” on page 3-7
.