Netgear WG302 Manual Do Utilizador

Management

4-7

The Available Wireless Station List contains a table of all IP devices associated with the wireless 
access point in the wireless network defined by the Wireless Network Name (SSID). From the 
main menu of the browser interface, under the Information heading, click the Available Wireless 
Station List link to view the list, shown below.

For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the 
device is allowed to communicate with the wireless access point or not). 

Note that if the wireless access point is rebooted, the table data is lost until the wireless access 
point rediscovers the devices. To force the wireless access point to look for associated devices, 
click the Refresh button.

Note: A wireless network can include multiple wireless access points, all using the same network 
name (SSID). This enables extending the reach of the wireless network and allows users to roam 
from one access point to another, providing seamless network connectivity. Under these 
circumstances, be aware that only the stations associated with this access point will be presented in 
the Available Station List.

.

You cannot perform the firmware upgrade from a workstation connected to the WG302 via a 
wireless link. The firmware upgrade must be performed via a workstation connected to the 
WG302 via the Ethernet LAN interface. 

The software of the WG302 Access Point is stored in FLASH memory, and can be upgraded as 
new software is released by NETGEAR. Upgrade files can be downloaded from Netgear's Web 
site. If the upgrade file is compressed (.ZIP file), you must first extract the image (.RMG) file 
before sending it to the wireless access point. The upgrade file can be sent using your browser. 

Note: When uploading software to the WG302 Access Point, it is important not to 
interrupt the Web browser by closing the window, clicking a link, or loading a new page. 
If the browser is interrupted, the upload may fail, corrupt the software, and render the 
WG302 completely inoperable.