Kenwood KDC-U349 Manual Do Utilizador

Connect the wiring harness to the unit. Other 
wiring connection has been completed earlier. 
(page 17)

Before attaching, make sure the direction of 
the escutcheon is correct.
(Wider hooks on the top side.)

Dashboard of your car

T: Toyota cars
N: Nissan cars

1  Detach the faceplate.
2  Engage the catch pin on the removal tools into 

the holes on both sides of the escutcheon, then 
pull it out.

3  Insert the removal tools deeply into the slots on 

each side, then follow the arrows instructions as 
on the right.

Bend the appropriate tabs 
to hold the mounting sleeve 
firmly in place.

1  Remove the mounting sleeve and 

escutcheon from the unit.

2  Align the holes in the unit (on both sides) 

with the vehicle mounting bracket and 
secure the unit with the supplied screws.

Connecting the ISO connectors on some VW/Audi or 
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring 
harness as illustrated below.

Unit

Vehicle

A7 (Red)

Ignition wire 

(Red)

A4 (Yellow)

Default wiring

Battery wire 

(Yellow)

ISO connectors

Pin

Color and function

A4
A5
A7
A8

Yellow
Blue/White
Red
Black

Battery
Power control
Ignition (ACC)
Earth (ground) connection

B1 / B2
B3 / B4
B5 / B6
B7 / B8

Purple 

ª

 / Purple/black 

·

Gray 

ª

 / Gray/black 

·

White 

ª

 / White/black 

·

Green 

ª

 / Green/black 

·

Rear speaker (right)
Front speaker (right)
Front speaker (left)
Rear speaker (left)

(KDC-U449/ KDC-U3049/ KDC-U349 only)

EN02-19_KDC-U449[M]f.indd   18

EN02-19_KDC-U449[M]f.indd   18

9/13/10   5:40:34 PM

9/13/10   5:40:34 PM