D-Link voip ta dvg-5112s Manual Do Utilizador
DVG-5112S User’s Manual
D-Link Systems, Inc. 5
1-2 Hardware Connections and Description
Front Panel
Power/Alarm Indicator: Green light indicates a normal power supply. Red
light indicates when performing a self-test/booting up or the DVG-5112S’s
abnormal operation.
abnormal operation.
VoIP Indicator: Blinking green light indicates normal operation. It will light
on green when DVG-5112S is registered with the service provider.
Phone1/Phone2 Indicator: Phone LED should be in orange while
Phone in use.
Note: When starting up DVG-5112S, the Alarm and VoIP will light up. After about 40 seconds, the VoIP
indicator will blink in green. If the Alarm indicator continues to blink, it means DVG-5112S is
currently communicating with ISP and has yet to obtain an IP address or fail to register to VoIP
Service Provider.
currently communicating with ISP and has yet to obtain an IP address or fail to register to VoIP
Service Provider.
Left Side
RST
RST
RST: Use to Restore to factory default: (IP address, Administrator's Name and Password)
(1) Disconnect the power plug.
(2) Press and hold the reset button for 6 seconds.
(3) Reconnect the power plug while pressing down on the reset button.
(4) Release the reset button after 6 seconds. Factory settings will be restored.
(2) Press and hold the reset button for 6 seconds.
(3) Reconnect the power plug while pressing down on the reset button.
(4) Release the reset button after 6 seconds. Factory settings will be restored.