Crestron electronic TPS-6X-DS Manual Do Utilizador

Crestron TPS-6X-DS 

 

Docking Station for the TPS-6X

Ensure the touchpanel is securely placed on the docking station and placed in lock 
mode. Then slide the locking pin accessory straight through the slot of the latch of 
docking station until the locking pin clicks into place (refer to the illustrations 
below). 

The locking pin can be installed from the left or right side of the docking station with 
the snap of the pin facing in or out of the slot on the latch. 

When in permanent lock mode, the touchpanel is permanently secured onto the 
docking station. While the locking pin is removable, it is recommended that the user 
only use the locking pin when necessary. Refer to the CAUTION below. 

LOCKING PIN 
ACCESSORY

SLOT

LOCKING PIN 
ACCESSORY

 

CAUTION:  Use caution if this locking pin must be removed. Using excess force 
while removing the locking pin once it has been installed can damage the latch of the 
docking station and render the locking mechanism unusable. 

 

•  9