Crestron electronic TPS-6X-DS Manual Do Utilizador

Docking Station for the TPS-6X 

 

Crestron TPS-6X-DS

The tiltable docking port on the TPS-6X-DS allows the touchpanel to be tilted at any 
angle up to 45 degrees for optimal viewing and operation. The angle can be freely 
adjusted during use or locked down at a fixed angle. A finger-operated latch can be 
engaged at any time to lock the touchpanel securely to the docking station or left 
unlocked for easiest removal after recharging. For a fulltime tabletop touchpanel 
solution, the touchpanel and docking station can be semi-permanently attached 
together using a special locking key pin provided. 

Its sleek appearance belies a surefooted design offering excellent stability on any flat 
surface. A single cable exits the rear of the docking station base, which can be 
repositioned to exit the bottom for a very clean, cordless appearance when 
permanently mounted. 

Specifications for the TPS-6X-DS are listed in the following table. 

NOTE:  The TPS-6X-DS is a passive device requiring no power; refer to TPS-6X 
and TPS-6X-IMCW specifications for other power requirements. 

Environmental  
 

Temperature 

32º to 112ºF (0º to 45ºC) 

 

Humidity 

10% to 90% RH (non-condensing) 

Enclosure 

Injection-molded plastic, high gloss black 
finish, 45° to 90° tilt docking port, adjustable 
friction clutch tilt mechanism, low-profile base, 
integral cable assembly 

Dimensions  
 Height 

4.25 in (10.80 cm) 
6.00 in (15.25 cm) with touchpanel mounted 

 

Width 

6.96 in (17.67 cm) 

 Depth 

7.03 in (17.84 cm) 
6.53 in (16.57 cm) without grommet 

Weight 

1.25 lbs (0.57 kg) 

Included Accessories 

 

 TPS-6X-IMCW 

Interface 

Module 

Available Accessories 

 

 PW(I)-1215 

12 Volt Power Pack 

 

 

 

•  Docking Station for the TPS-6X: TPS-6X-DS