FMI B42LI-M Manual Do Utilizador

www.fmiproducts.com

115386-01D

SaFeTy

WARNING: Do not install a

fireplace insert in this box unless

the manufacturer's instructions

with the insert specifically state

this fireplace has been tested for

use with this insert.

FOR YOUR SAFETY

• Do not store or use gasoline

or any other flammable vapors

or liquids in the vicinity of this

or any other appliance.

• Due to high temperatures, the

appliance should be located

out of traffic and away from

furniture and draperies.

• Do not place clothing or other

flammable materials on or near

the appliance.

• Never leave children unat-

tended when a fire is burning

in the fireplace.

WARNING: Use solid wood

or processed solid fuel fire logs

only. When processed wood

fuel fire logs are used, do not

poke or stir the logs while they

are burning. Use only fire logs

that have been evaluated for

the application in fireplace and

refer to fire log warnings and

caution markings on packaging

prior to use.

This fireplace is not intended to

be used as a substitute for a fur-

nace to heat an entire home. Use

for supplemental heat only.

WARNING: Improper instal-

lation, adjustment, alteration,

service or maintenance can

cause injury, property damage or

loss of life. Refer to this manual

for assistance or additional in-

formation. Consult a qualified

installer or local distributor.

IMPORTANT: Check local codes

before installing this fireplace.

Before beginning installation of this fireplace,
read these instructions through completely.
• This FMI PRODUCTS, LLC fireplace and

its  components  are  safe  when  installed
according  to  this  installation  manual.
Unless  you  use  FMI  PRODUCTS,  LLC
components,  which  have  been  designed
and  tested  for  the  fireplace  system,  you
may cause a fire hazard.

• The FMI PRODUCTS, LLC warranty will

be voided by and FMI PRODUCTS, LLC
disclaims any responsibility for the following
actions.

a. Modification of the fireplace, com-

ponents, doors, air inlet system and
damper control.

b. Use of any component part not manufac-

tured or approved by FMI PRODUCTS,
LLC in combination with a FMI PROD-
UCTS, LLC fireplace system.

Proper installation is the most important step
in ensuring safe and continuous operation of
fireplace. Consult the local building codes as
to the particular requirements concerned with
the installation of all factory built fireplaces.

Table oF conTenTS

Safety .................................................................. 2
Specifications ...................................................... 3
Fireplace Installation............................................ 4
Venting Installation .............................................. 7
Optional Gas Line Installation............................ 13

Operation and Maintenance .............................. 14
Technical Service............................................... 15
Parts .................................................................. 16
Replacement Parts ............................................ 18
Accessories ....................................................... 18