Casio exilim ma1006-a Manual Do Utilizador

164

Appendix

The time and date 
settings configured 
the first time after 
purchasing the 
camera are reset to 
their factory 
defaults when 
remove the 
camera’s battery.

Load the camera’s battery and reconfigure the time and date 
settings (page 19). Do not remove the battery from the camera 
for at least 24 hours after configuring time and date settings. 
After that, the settings will not be reset if you remove the 
battery.

• If the time and date are reset to their factory default settings 

when you remove the battery after it has been loaded for 
more than 24 hours, it could mean that the camera’s setting 
memory is defective. Contact your retailer or a CASIO 
authorized service center.

Buttons are not 
responsive right 
after the power has 
been turned on.

With large capacity memory cards there is a delay after the 
power has been turned on before the buttons become 
responsive.

The camera’s protection function may have activated 
because camera temperature is too high. Turn off the 
camera and wait until it cools down before trying to use it 
again.

Battery power is low.

Keystone correction of the image cannot be performed for 
some reason. The image will be stored as-is, without 
correction (page 60).

The image you specified with the slideshow “Images” setting 
cannot be found. Change the “Images” setting (page 92) and 
try again.

You are attempting to save a user BEST SHOT scene in the 
“SCENE” folder when the folder already contains 999 user 
scenes (page 58).

There is something wrong with the memory card. Turn off the 
camera, remove the memory card and then reload it into the 
camera. If this message re-appears when you turn the 
camera back on, format the memory card (page 144).

• Formatting a memory card deletes all its files. Before 

formatting, try transferring recoverable files to a computer 
or some other storage device.