CyberResearch PCIDIO 48H Manual Do Utilizador

2.2 Unpacking 

Your card contains sensitive electronic components that can be easily 
damaged by static electricity. 

The card should be put on a grounded anti

 

-static mat.  The operator should  

wear an anti

 

-static wristband, grounded at the same point as the anti

 

-static 

mat. 

Inspect the card module carton for obvious damage. Shipping  and 
handling may cause damage to your module. Be sure there is no shipping 
and handling damage on the module before processing. 

After opening the card module carton, extract the system module and place 
it only on a grounded anti

 

-static surface with components side up. 

Again inspect the module for damages.  Press down on all the socketed 
IC's to make sure that they are properly seated.  Do this only with the 
module place on a firm flat surface. 

Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN DAMAGED.