Nero nero showtime Manual Do Utilizador

Nero ShowTime 

‘Settings’ Dialogue Window  

•  11 

With this presetting the most common functions are shown on the toolbar.  

This setting causes all functions on the toolbar to be shown. 

   

 

If you would like to call Nero ShowTime Skin during full-screen playback, simply 
click on the left mouse key. 

 

If the ‘Hardware Acceleration’ option is enabled, the DVD-Video image 
acceleration is taken over by your graphics card. This reduces the load on the 
main processor and may lead to improved video performance.  

 

 

 

Please note that it is only possible to switch the hardware acceleration on and off
when there is no playback.  

 

 

 

In this menu you set the appearance of the playback window at the start of Nero 
ShowTime.  

If the ‘Run Full-screen’ option is enabled, the film played is automatically shown 
on the entire screen.  

If the ‘Retain Aspect Ratio’  option is enabled, the film will be shown in its original 
aspect ratio (or rather, height x width).  

If the ‘Hide Video Window’ option is enabled, then the playback window is first 
shown when the film is played. Prior to that time it is invisible.  

In this menu you can set whether you would like to work with de-interlacing in 
playback or not.  

 

 

 

In the Interlaced Mode video images are shown as two different half-images. In 
the first half-image every other image line is represented; shortly thereafter the
second half-image shows the remaining lines, so that a complete image is 
suggested to the eye. Conventional TV screens use this technology, while
computer monitors work with high, non-flickering frequencies, so that they are 
run without any jumping of lines. 

 

 

If you detect stripes running through the image during playback of the film, you 
should not enable the ‘Switch Off De-interlacing’ option.