Fujitsu 3400 Manual Do Utilizador
28
Using the Stylistic 3400 Pen Tablet
Operation of the Bridge Battery
When installed in the pen tablet, the battery pack provides power to some system
components—even when the system is in the Off state. When the battery pack is
removed, power is supplied to these components by a “bridge” battery that is built
into the pen tablet.
components—even when the system is in the Off state. When the battery pack is
removed, power is supplied to these components by a “bridge” battery that is built
into the pen tablet.
The bridge battery is not designed for long-term operation. To maintain the bridge
battery properly, observe the following measures:
battery properly, observe the following measures:
Note:
The system arrives with the bridge battery in a discharged state.
• To prevent draining the bridge battery, always store the pen tablet with a charged
battery pack installed.
• If the bridge battery becomes drained, it takes approximately 11 hours for it to be
fully recharged.
• The bridge battery charges when the AC Adapter is connected and the system is
in On or Off states or Suspend mode. It charges from the battery only when the
system is in the On state.
system is in the On state.
Modem Connection
2
Note:
•
The internal 56 Kbps LAN/modem module installed in the Stylistic 3400 pen
tablet has actual maximum transfer rates of 53 Kbps (receive), 33.6 Kbps (send),
and 14.4 Kbps (fax). Download rates are limited to 53 Kbps in the United States
due to FCC restrictions.
tablet has actual maximum transfer rates of 53 Kbps (receive), 33.6 Kbps (send),
and 14.4 Kbps (fax). Download rates are limited to 53 Kbps in the United States
due to FCC restrictions.
•
The LAN portion of the internal LAN/modem module can only be used when the
system is used with the optional mini-dock or port replicator; there is no LAN
port on the system itself.
system is used with the optional mini-dock or port replicator; there is no LAN
port on the system itself.
The Stylistic 3400 pen tablet is designed to accept a standard RJ-11 telephone plug.
Connect the plug to the modem jack located on the top of the pen tablet, to the left of
the IrDA port (reference Figure 1-1). The telephone plug can be installed whether or
not the pen tablet has power applied.
Connect the plug to the modem jack located on the top of the pen tablet, to the left of
the IrDA port (reference Figure 1-1). The telephone plug can be installed whether or
not the pen tablet has power applied.
If you need assistance configuring the Stylistic 3400 pen tablet modem or LAN,
contact your local help desk or your reseller.
contact your local help desk or your reseller.