Lanier 5635 Manual Do Utilizador
Stamp
Special Copier Functions
6 17
6
Touch the Program/Delete
Stamp key.
Stamp key.
Programming the User Stamp
1
Press the Program key.
2
Touch the stamp number from 1-
4 that you want to program.
4 that you want to program.
•
Stamp numbers with the data
in symbol in front of it are
already in use.
already in use.
•
If the stamp number is being
used, the message on the
display asks if you want to overwrite it. Select either Yes of No.
display asks if you want to overwrite it. Select either Yes of No.
3
Enter the stamp name using the
letter keys in the message
display.
letter keys in the message
display.
•
Up to 10 character can be
entered.
4
Touch the OK key.
5
Enter the horizontal size of the
stamp using the keypad. Then
touch the # key.
stamp using the keypad. Then
touch the # key.
6
Touch the Veritcal key, and
enter the vertical size of the
stamp using the keypad. Then,
touch the # key.
enter the vertical size of the
stamp using the keypad. Then,
touch the # key.
7
Set the User Stamp on the exposure glass and then touch the Start Scanning key.
•
The machine scans the original three times. Do not lift the document feeder until the