Netgear WN604 Manual Do Utilizador
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Getting Started
8
Wireless N150 Access Point WN604
Front Panel
The access point front hardware functions are described below.
Power
Wi-Fi
WPS
LAN ports 1–4
Figure 1. WN604 front panel
The following table explains the LED indicators on the front panel.
Table 1. Front panel LEDs
LED
Description
Power
• Solid green. Power is on and the access point is ready.
• Blinking green. A firmware update is in process.
• Solid amber. The access point is performing a power-on self-test.
• Off. No power.
• Blinking green. A firmware update is in process.
• Solid amber. The access point is performing a power-on self-test.
• Off. No power.
Wi-Fii Protected
Setup (WPS)
Setup (WPS)
• Blinking green. WPS activities are in process.
• Off. No WPS activity, or there is a WPS error.
• Off. No WPS activity, or there is a WPS error.
Wi-Fi
• Solid blue. The wireless radio is up and running without wireless data
transmission.
• Blinking blue. Wireless data is being sent or received.
• Off. The wireless interface is turned off.
• Off. The wireless interface is turned off.
LAN ports 1–4
• Solid green. 100 Mbps link detected, no data transmission on the port.
• Blinking green. 100 Mbps link detected, data transmission on the port.
• Solid amber. 10 Mbps link detected, no data transmission on the port.
• Blinking amber. 10 Mbps link detected, data transmission on the port.
• Off. No link is detected
• Blinking green. 100 Mbps link detected, data transmission on the port.
• Solid amber. 10 Mbps link detected, no data transmission on the port.
• Blinking amber. 10 Mbps link detected, data transmission on the port.
• Off. No link is detected
www.vandenborre.be