Kenwood KDC-BT51U Manual Do Utilizador
English
|
45
Registering Special bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
registered normally (pairing).
1
Enter Bluetooth mode
KDC-BT51U
Press the [ ] button.
KDC-5751SD
KDC-5051U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
“BT MODE” is displayed.
2
Enter Function setting mode
Press the Control knob for at least 1 second.
Press the Control knob for at least 1 second.
3
Select Special device registration mode
The item can be selected and determined as
follows.
“Settings”
The item can be selected and determined as
follows.
“Settings”
>
“Pairing”
>
“SPCL Device Select”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
determine the item, press the Control knob.
4
Select a desired device name
Turn the Control knob to select device name,
and then press the Control knob.
If “Completed” is displayed, registration is
completed.
Turn the Control knob to select device name,
and then press the Control knob.
If “Completed” is displayed, registration is
completed.
5
Go through the procedure of
Bluetooth device> (page 44)
and complete the
registration (pairing).
Cancelling Bluetooth mode
Press the [SRC] button.
⁄
•
If the device name is not in the list, select “Other Phones”.
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
code necessary for registering this unit.
1
Enter Bluetooth mode
KDC-BT51U
Press the [ ] button.
KDC-5751SD
KDC-5051U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
“BT MODE” is displayed.
2
Enter Function setting mode
Press the Control knob for at least 1 second.
Press the Control knob for at least 1 second.
3
Select PIN code edit mode
The item can be selected and determined as
follows.
“Settings”
The item can be selected and determined as
follows.
“Settings”
>
“Detailed Settings”
>
“PIN Code Edit”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
To select the item, turn the Control knob. To
determine the item, press the Control knob.
4
Input the PIN code
Operation type
Operation
Select the numbers.
Turn the Control knob.
Move to the next digit.
Push the Control knob towards right.
Delete the last digit.
Push the Control knob towards left.
Transmit the PIN code.
Press the Control knob.
If “Completed” is displayed, registration is complete.
5
Exit Bluetooth mode
Press the [SRC] button.
Press the [SRC] button.
⁄
•
By default, “0000” is specified.
•
A PIN code can be specified with up to eight digits.