GMC savana 2002 Manual Do Utilizador

Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don’t need to reset it.

Once you’re going about 25 mph (40 km/h) or more,
you can move the cruise control switch briefly from 
on to resume/accelerate.

You’ll go right back up to your chosen speed and 
stay there.

If you hold the switch at resume/accelerate, the vehicle
will keep going faster until you release the switch or
apply the brake. So unless you want to go faster, 
don’t hold the switch at resume/accelerate.

There are two ways to go to a higher speed:
D Use the accelerator pedal to get to the higher speed.

Push the button at the end of the lever, then release
the button and the accelerator pedal. You’ll now
cruise at the higher speed.

D Move the cruise switch from on to

resume/accelerate. Hold it there until you get up 
to the speed you want, and then release the switch.
To increase your speed in very small amounts, 
move the switch briefly to resume/accelerate briefly. 
Each time you do this, your vehicle will go 
about 1 mph (1.6 km/h) faster.