Falcon OM48021-1 Manual Do Utilizador

OM48021-1 Rev. C 

4

The SVR Series Precision Utility Voltage Regulator and Conditioner is designed to be maintenance-free.  It can be 
cleaned with a damp cloth or nonabrasive cleanser providing it is turned off and the input plug is disconnected from the 
utility source.  Be sure vents and fans are kept free from accumulation of dust, dirt or lint. 
 
 

FALCON

®

 ELECTRIC SVR SERIES 

INSTALLATION AND STARTUP CHECK LIST 

 
1. 

Verify the following is included in the SVR shipping carton: 

 

• SVR 

   

 

• Power 

Cord 

 

• Owner’s 

Manual     

 
2. 

Verify that the SVR unit is configured for the proper input/output voltage and frequency. This information is stated 
on the nameplate label located on the rear panel of the unit as well as setting dip switch settings also located on 
the SVR rear panel.  

 
3. 

For the 1kVA model, connect the power cord to the inlet located on the SVR rear panel.  

 
4. 

Select a suitable location for the SVR near enough to the computer or equipment to connect the power cord.  

 

Verify the location you have selected has adequate ventilation to allow for the proper cooling of the SVR. DO 

. 

 
5. 

Turn the input switch located on the SVR rear panel to the “on” position. The internal SVR fan will turn on and 

after   several seconds the front panel “line” indicator should turn on, followed by the “inverter” indicator. 
 
6. 

Turn on the connected equipment and verify the SVR does not go into overload, by using the front panel load  

 

indicator.   

 
 

, TURN OFF THE INPUT CIRCUIT BREAKER. THE SVR WILL RUN FOR ABOUT 30 

SECONDS AND SHUTDOWN.