Frigidaire 134126300b Manual Do Utilizador

•If caused by detergent, mix 1 cup (240 ml)

white vinegar with 1 quart (.95 L) water in a
plastic container. Soak item 1 hour. Rinse.

•If caused by fabric softener, rub stains with

bar soap. Wash.

•Rewash with correct amount of detergent

and hottest water safe for fabric. Add
bleach safe for fabric.

•Treat with prewash stain remover or liquid

detergent.

•Increase detergent and water temperature.

Rewash.

•Rub fabric softener stains with bar soap.

•May be irreversible if rips, tears and seams

cannot be mended.

•Reduce load size. Rewash using correct

water temperature, water level, and
amount of detergent.

•Add  nonprecipitating water conditioner to

wash water.

•Add liquid fabric softener to final rinse.
•Dry load in dryer.
•Remove lint with lint brush or roller.

•Use a lint brush or shaver to remove pills.

•Reduce load size.
•Add dissolved detergent to tub . Rewash

load.

•Mix 1 cup (240 ml) white vinegar to 1 gallon

(3.8 L) warm water in plastic container.
Soak item. Rinse and rewash.

•Reduce load size.
•Rinse in cold water with liquid fabric

softener.

•Soak in detergent booster or product

containing enzymes.

•Wash in hot water (120°F/49°C) using full

permanent press cycle. Increase detergent.
Add bleach safe for fabric.

•Or, treat with color remover.

•To restore discolored load of whites, use rust

remover safe for fabric.
Do not use chlorine bleach to remove
rust stains. It may intensify
discoloration.

Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory washing
results, follow these suggestions provided by The Soap and Detergent Association.

•Detergent or liquid fabric softener

did not dissolve or disperse.

•Not enough detergent.
•Wash water temperature too low.
•Incorrect sorting.

•Not enough detergent.
•Undiluted liquid fabric softener

poured directly on fabric.

•Incorrect use of chlorine bleach.
•Unfastened zippers, hooks, buckles.
•Rips, tears and broken threads.
•Overloading the washer.
•Degradation of fabric.

•Incorrect sorting.
•Tissues left in pocket.
•Overloading the washer.
•Not  enough detergent.
•Undissolved detergent has left

residue.

•Static cling is attracting lint.
•Load washed too long.

•Pilling is normal with synthetic and

permanent press fabrics. This is due
to abrasion from  normal wear.

•Undissolved detergent.
•Some nonphosphate granular

detergents can combine with hard
water minerals to form a residue.

•Overloading the washer.

•Agitation time too short.
•Wash water temperature too low.
•Not enough detergent.

•Iron or manganese in water supply,

water pipes, or water heater.

Pilling
(Fibers break off,
ball up and cling to
fabric)

•Add detergent before wash load. Then

start washer.

•Dilute fabric softener with water.

•Sort items by soil level and color.
•Use correct amount of detergent, hottest

water and bleach safe for fabric.

•Use correct  amount of detergent and hottest

water safe for fabric.

•Do not pour liquid fabric softener directly

on fabric. See package directions or Washing
Procedures for proper diluting.

•Never pour chlorine bleach directly on

fabric.

•Check condition of items before washing.

See  Washing Procedures for preparing
and loading the wash load.

•See  Washing Procedures for sorting and

preparing the wash load.

•Do not overload washer.
•Use correct amount of detergent, water

temperature and water level.

•Use fabric softener in the washer to

lubricate fibers.

•When ironing, use spray starch or fabric

finish on collars  and cuffs.

•Turn items inside out to reduce abrasion.

•Increase water temperature using hottest

water safe for fabric.

•Do not overload washer.
•Use liquid detergent or use

nonprecipitating water conditioner with
nonphosphate granular detergent.

•Do not overload washer.
•Remove items from washer as soon as

cycle is completed.

•Use liquid fabric softener.

•Wash synthetics frequently using water at

least 100°F (37°C ) and correct water level.

•Use nonprecipitating water softener.
•Before washing, run hot water for a few

minutes to clear lines.

•Drain water heater occasionally.
•For an ongoing problem, install an iron

filter in your water supply system.