Banner American Products p4 geo Manual Do Utilizador

P/N 118000 rev. A

Banner Engineering Corp.

•

Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

Introducing PresencePLUS P4

The PresencePLUS P4 (or the Sensor) is an easy-to-use

vision sensor with advanced visual inspection capabilities.

With minimal knowledge of vision, a user can quickly set up

the Sensor to run an inspection that tests all products and

accurately rejects bad products on a production line.
Inspections are set up using a personal computer (PC) or by

activating the Remote Teach input. The Sensor captures images

and analyzes them using one or more Vision tools to pass or fail

the product. The PC is not required for running inspections after

the inspection files have been stored in the Sensor’s memory.

Start

Hook Up the Hardware

Install the Software and

Establish Communications

Acquire an Image of the Part

Being Inspected

Choose Vision Tool(s) to
Find the Flaw or Feature

Add a Test Tool To Set Up

Pass/Fail Criteria

Teach Good Examples

Run

Finish

Install Lens and

Filters (if used)

Quick Start Overview

This guide is designed to

provide – even to those

new to vision sensing

– the information needed

to use this sensor. It

provides an overview of

the PresencePLUS P4 and

illustrates how to easily set

up the Sensor to inspect a

product. The flow chart at

left provides an overview of

the process.

TIPS

For more detailed

instructions, refer

to the User’s

Manual on the

installation CD.

sensor

introduction

sensor

introduction