crimestopper-security-pro rs-1 Manual Do Utilizador

 

 

 
BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS 
BRAKES, ENGINE / BODY COMPUTER AND BATTERY). 

 
PLAN OUT YOUR INSTALLATION and determine most suitable locations for all components to be placed. These components 
include:  the module itself, valet/program button, possible relays, and antenna/receiver (RS-1, RS-3 and RS-4 only, the RS-00 
model does not include antenna or remotes.)  Allow enough wire to create a service loop with strain relief, should servicing be 
required.  This will also allow easier access and mounting. 

 
DAMAGE to the CoolStart unit resulting from incorrect installation or failure to follow guidelines stated in this book will not be 
covered under warranty and will be subject to repair or replacement charges. 

 
USE A VOLT OHM METER to test and locate all connections.  Test Lights can damage a vehicle’s computer systems. 

 
ADDITIONAL PARTS, which are not included with this unit, may be needed for your particular vehicle.   These items may include 
extra relays or Anti-Theft System Bypass modules.