Zebra 49834 Manual Do Utilizador
Troubleshooting
Print Engine Diagnostics
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
117
PAUSE Self Test
This self test can be used to provide the test labels required when making adjustments to the
print engine’s mechanical assemblies.
print engine’s mechanical assemblies.
To perform a PAUSE self test, complete these steps:
1.
Turn Off (O) the print engine.
2.
Press and hold PAUSE while turning the power On (I). Hold PAUSE until the DATA light
turns off.
turns off.
•
The initial self test prints 15 labels at the print engine’s slowest speed, and then
automatically pauses the print engine. Each time PAUSE is pressed, an additional 15
labels print.
automatically pauses the print engine. Each time PAUSE is pressed, an additional 15
labels print.
shows a sample of the labels.
Figure 48 • PAUSE Test Label
•
While the print engine is paused, pressing CANCEL alters the self test. Each time
PAUSE
PAUSE
is pressed, 15 labels print at 6 in. (152 mm) per second.
•
While the print engine is paused, pressing CANCEL again alters the self test a second
time. Each time PAUSE is pressed, 50 labels print at the print engine’s slowest speed
time. Each time PAUSE is pressed, 50 labels print at the print engine’s slowest speed
•
While the print engine is paused, pressing CANCEL again alters the self test a third
time. Each time PAUSE is pressed, 50 labels print at 6 in. (152 mm) per second.
time. Each time PAUSE is pressed, 50 labels print at 6 in. (152 mm) per second.
•
While the print engine is paused, pressing CANCEL again alters the self test a fourth
time. Each time PAUSE is pressed, 15 labels print at the print engine’s maximum
speed.
time. Each time PAUSE is pressed, 15 labels print at the print engine’s maximum
speed.
•
To exit this self test at any time, press and hold CANCEL.