Zebra 49834 Manual Do Utilizador
132
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
Preventive and Corrective Maintenance
Preventive Maintenance—Tools Required for Preventive Maintenance
Tools Required for Preventive Maintenance
Recommended Preventive Maintenance Schedule
Lubrication
Cleaning the Exterior
•
Clean the exterior surfaces of the print engine with a lint-free cloth.
•
Do not use solvents or harsh cleaning agents.
•
If the unit is excessively dirty, use a mild detergent solution or desktop cleaner sparingly.
47362* Zebra Preventative Maintenance
Kit
Cotton Swabs
Lint-Free Cloth
Isopropyl Alcohol
* A solution of 90% isopropyl alcohol and 10% deionized water and clean swabs may be used in place of
the Preventative Maintenance Kit.
Table 18 • Preventive Maintenance Schedule
Area
Method
Interval
Printhead
Solvent*
Perform these procedures at the following times:
• When
CLEAN HEAD NOW
appears.
• Direct Thermal Print Mode: After every roll of
labels or 500 ft (150 m) of fanfold labels.
• Thermal Transfer Print Mode: After every roll
(1500 ft. or 450 m) of ribbon.
Platen roller
Solvent*
Transmissive media sensor
Air blow
Reflective media sensor
Air blow
Media path
Solvent*
Ribbon sensor
Air blow
Door-open sensors
Air blow
Monthly
Tear-off/peel-off bar
Solvent*
* Use Zebra Preventative Maintenance kit, part number 47362, or a solution of 90% isopropyl alcohol and
10% deionized water.
10% deionized water.
Caution • This print engine does not require lubrication. Applying lubricants may damage
your print engine’s finish and decrease the performance of its electromechanical parts.
your print engine’s finish and decrease the performance of its electromechanical parts.