IBM 1725 SLS Manual Do Utilizador
Media Jams
QMS 1725 SLS Print System User's Guide
6-20
4
After removing the media, close the fuser assembly rear
door and make sure it is properly in place before closing the
printer or the printer may be damaged.
door and make sure it is properly in place before closing the
printer or the printer may be damaged.
5
Close the printer top cover.
Clearing an Output Bin Media Jam
Follow these steps to clear a jam from the output area:
1
Open the printer top cover and locate the fuser assembly.
M WARNING: Be careful; the area around the fuser assembly is hot.
ACHTUNG! Verletzungsgefahr! Bei Betrieb wird die Umgebung der
Fixiereinheit heiß.
2
If the media is jammed inside the fuser assembly, grasp the
edge of the media and remove it.
edge of the media and remove it.
3
If the jammed media has passed completely through the
fuser assembly and is partially visible in the upper output
fuser assembly and is partially visible in the upper output