Intel BX80635E52697V2 Manual Do Utilizador
Intel® Xeon® Processor E5-1600 v2/E5-2600 v2 Product Families
89
Datasheet Volume One of Two
Power Management
While individual threads can request low power C-states, power saving actions only
take place once the core C-state is resolved. Core C-states are automatically resolved
take place once the core C-state is resolved. Core C-states are automatically resolved
by the processor. For thread and core C-states, a transition to and from C0 is required
before entering any other C-state.
4.2.3
Requesting Low-Power Idle States
The core C-state will be C1E if all actives cores have also resolved a core C1 state or
higher.
The primary software interfaces for requesting low power idle states are through the
MWAIT instruction with sub-state hints and the HLT instruction (for C1 and C1E).
MWAIT instruction with sub-state hints and the HLT instruction (for C1 and C1E).
However, software may make C-state requests using the legacy method of I/O reads
Figure 4-1. Idle Power Management Breakdown of the Processor Cores
Figure 4-2. Thread and Core C-State Entry and Exit
P r o c e s s o r P a c k a g e S t a t e
C o r e N S t a t e
T h r e a d 1
T h r e a d 0
C o r e 0 S t a t e
T h r e a d 1
T h r e a d 0
C1
C1E
C6
C3
MWAIT(C1), HLT
C0
MWAIT(C6),
P_LVL3 I/O Read
MWAIT(C3),
P_LVL2 I/O Read
MWAIT(C1), HLT
(C1E Enabled)