Kenwood KDC-MP249 Manual Do Utilizador

ENGLISH

Connecting the ISO connectors on some VW/Audi or 
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring 
harness as illustrated below.

(KDC-MP249/ KDC-MP2049/ KDC-MP149 only)

1  Remove the mounting sleeve and 

escutcheon from the unit.

2  Align the holes in the unit (on both 

sides) with the vehicle mounting bracket 
and secure the unit with the supplied 
screws.

Connect the wiring harness to the unit. Other wiring 
connection has been completed earlier. (page 14)

Before attaching, make sure 
the direction of the 
escutcheon is correct. (Wider 
hooks on the top side.)

Dashboard of your car

T: Toyota cars
N: Nissan cars

Unit

Vehicle

A7 (Red)

Ignition wire 

(Red)

A4 (Yellow)

Default wiring

Battery wire 

(Yellow)

1  Detach the faceplate.
2  Engage the catch pin on the removal 

tools into the holes on both sides of the 
escutcheon, then pull it out.

3  Insert the removal tools deeply into 

the slots on each side, then follow the 
arrows instructions as shown below.

ISO connectors

Pin

Color and function

A4
A5
A7
A8

Yellow
Blue/White
Red
Black

Battery
Power control
Ignition (ACC)
Earth (ground) connection

B1 / B2
B3 / B4
B5 / B6
B7 / B8

Purple 

ª

 / Purple/black 

·

Gray 

ª

 / Gray/black 

·

White 

ª

 / White/black 

·

Green 

ª

 / Green/black 

·

Rear speaker (right)
Front speaker (right)
Front speaker (left)
Rear speaker (left)

Bend the appropriate tabs 
to hold the mounting 
sleeve firmly in place.

EN02-15_KDC-MP249[M]f.indd   15

EN02-15_KDC-MP249[M]f.indd   15

8/10/10   10:24:04 AM

8/10/10   10:24:04 AM