Kenwood KDC-U453 Manual Do Utilizador
20
Installing the unit
Removing the unit
2
1
Connect the wiring harness
to the unit. Other wiring
connection has been completed
earlier. (page 18, 19)
to the unit. Other wiring
connection has been completed
earlier. (page 18, 19)
Before attaching, make
sure the direction of the
escutcheon is correct.
(Wider hooks on the
top side.)
sure the direction of the
escutcheon is correct.
(Wider hooks on the
top side.)
Dashboard of your car
1 Detach the faceplate.
2 Engage the catch pin on the
2 Engage the catch pin on the
removal tools into the holes on
both sides of the escutcheon, then
pull it out.
both sides of the escutcheon, then
pull it out.
3 Insert the removal tools deeply into
the slots on each side, then follow
the arrows instructions as shown
on the right.
the arrows instructions as shown
on the right.
Bend the appropriate tabs
to hold the mounting
sleeve firmly in place.
to hold the mounting
sleeve firmly in place.
Installing without using the mounting sleeve (Japanese car)
(For
)
1 Remove the mounting sleeve and escutcheon from the unit.
2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure
2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure
the unit with the supplied screws.
T: Toyota cars ; N: Nissan cars
EN_KDC-U453[M]2.indd 20
EN_KDC-U453[M]2.indd 20
9/6/11 5:43:05 PM
9/6/11 5:43:05 PM