Kenwood KDC-126 Manual Do Utilizador

Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM band 9 kHz.

Turn the power OFF
Press the [SRC] button for at least 1 second.

Switch the frequency step
While pressing the [1] and [5] button, press the [SRC] button.
The frequency step changes to FM band 200 kHz, and AM band
10 kHz.

• When the same operation is repeated, it returns to the original

setting.

• When the frequency step is switched, the frequencies in the

memory are deleted.

Calling up the stations in the memory.

Select the band
Press the [FM] or [AM] button.

Call up the station
Press the [1] — [6] button.

Putting stations with good reception in the memory
automatically.

Select the band for Auto Memory Entry
Press the [FM] or [AM] button.

Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.

Putting the station in the memory.

Select the band
Press the [FM] or [AM] button.

Select the frequency to put in the memory
Press the [

4] or [¢] button.

Put the frequency in the memory
Press the [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [1] —
[6] button.

— 10 —

KDC-226B_U.S  04.12.21  0:59 PM  Page 10