Kenwood KDC-334SG Manual Do Utilizador

English

   

|

   

2WARNING

•  To prevent a short circuit, never put or leave any 

metallic objects (such as coins or metal tools) 
inside the unit.

2CAUTION

•  Make sure to ground the unit to a negative 12V 

DC power supply.

•  Do not install the unit in a spot exposed to direct 

sunlight or excessive heat or humidity. Also avoid 
places with too much dust or the possibility of 
water splashing.

•  Do not place the faceplate in areas exposed to 

direct sunlight, excessive heat or humidity. Also 
avoid places with too much dust or the possibility 
of water splashing.

•  To prevent deterioration, do not touch the 

terminals of the unit or faceplate with your 
fingers.

•  Do not subject the faceplate to excessive shock, 

as it is a piece of precision equipment.

•  When replacing a fuse, only use a new fuse with 

the prescribed rating. Using a fuse with the wrong 
rating may cause your unit to malfunction.

•  Do not use your own screws. Use only the screws 

provided. If you use the wrong screws, you could 
damage the unit.

If you try to load a 3 in. CD with its adapter into the 
unit, the adapter might separate from the CD and 
damage the unit.

When you turn on the car heater in cold weather, 
dew or condensation may form on the lens in the 
CD player of the unit. Called lens fogging,  this 
condesnation on the lens may not allow CDs to 
play. In such a situation, remove the disc and wait 
for the condensation to evaporate. If the unit still 
does not operate normally after a while, consult 
your Kenwood dealer.

B64-3240-00_English_r2.indd   3

B64-3240-00_English_r2.indd   3

05.8.8   2:06:25 PM

05.8.8   2:06:25 PM