ZyXEL Communications ZyAIR G-3000 Manual Do Utilizador
ZyAIR G-3000 Quick Start Guide
21
PROBLEM CORRECTIVE
ACTION
The SYS LED is
off.
off.
Unplug the power adaptor and plug it in again. If the error persists, you may have a
hardware problem. In this case, you should contact your vendor.
hardware problem. In this case, you should contact your vendor.
I cannot ping any
computer on the
wireless LAN.
computer on the
wireless LAN.
If the ETHN LED is off, check the cables between the ZyAIR and your computer or
hub.
hub.
Verify that the IP address and the subnet mask of the ZyAIR and the computers are
in the same range.
in the same range.