Honeywell ml7425 Manual Do Utilizador
PRODUCT DATA
63-2516-07
ML6425, ML7425 Spring Return
Electric Linear Valve Actuators
APPLICATION
The ML6425 Spring Return Electric Linear Valve Actuators are
floating control actuators used with controllers that provide a
switched or floating single-pole double-throw (spdt) output.
These actuators operate standard Honeywell valves in
heating, ventilating, and air conditioning (HVAC) applications.
The ML7425 Spring Return Electric Linear Valve Actuators are
modulating control actuators used with controllers that provide
an analog output of 0 to 10 Vdc or 2 to 10 Vdc. These
actuators operate standard Honeywell valves in heating,
ventilating, and air conditioning (HVAC) applications. An
internal selector plug can be used to reverse the direction of
action.
FEATURES
ML6425 and ML7425
• Accurate valve positioning.
• Quick and easy installation.
• No separate linkage required.
• On power failure:
• Quick and easy installation.
• No separate linkage required.
• On power failure:
ML6425A and ML7425A drive valve stem down.
ML6425B and ML7425B draw valve stem up.
• Conduit connector is standard.
• No adjustments required.
• True spring return on power failure.
• Low power consumption.
• High close-off ratings.
• Force-limiting end switches.
• Direct/reverse action.
• Synchronous motor.
• Corrosion resistant design.
• Maintenance free.
• No adjustments required.
• True spring return on power failure.
• Low power consumption.
• High close-off ratings.
• Force-limiting end switches.
• Direct/reverse action.
• Synchronous motor.
• Corrosion resistant design.
• Maintenance free.
ML7425
• Position Feedback signal.
• Fail-safe position selection for control signal loss.
• Fail-safe position selection for control signal loss.
Contents
Ordering Information ........................................................
2