Terratec sine mb 33 ii Manual Do Utilizador
MIDI control
If a sound is modified by changing one of the controls, the SINE MB 33 II will send an
appropriate control-change message to the MIDI OUT which can then be recorded by a
MIDI sequencer. If these controller messages are returned to the SINE MB 33 II, this will
change the sound in a manner identical to the previous manual change. Recorded audio
sequences can be changed subsequently by editing or inserting controller values. The
following table provides an overview of the parameters and the associated controller
messages sent and received via MIDI.
appropriate control-change message to the MIDI OUT which can then be recorded by a
MIDI sequencer. If these controller messages are returned to the SINE MB 33 II, this will
change the sound in a manner identical to the previous manual change. Recorded audio
sequences can be changed subsequently by editing or inserting controller values. The
following table provides an overview of the parameters and the associated controller
messages sent and received via MIDI.
Parameter Controller
number Controller
values
Cutoff
107
0 – 127
Resonance
106
0 – 127
ENV MOD
104
0 – 127
Accent
103
0 – 127
Decay
102
0 – 127
Distortion
105
0 – 127
Autoslide
108
0: OFF / 1: ON
NOTE Controller 102 – 107:
controller value 0 = control knob at maximum
controller value 127 = control knob at minimum
controller value 127 = control knob at minimum
SINE MB 33 II (English)
13