eutech-instruments cyberscan con 11 conductivitytds meter Manual Do Utilizador

Instruction Manual 

 

CON 11/110 

 

29

When the PRINT (

) key is pressed, there are two options:  

1.  dAt / CUr: Prints current data on timed interval basis. The function enables 

the meter to continuously print the current data automatically based on the 
pre-set timing from 5 to 30 seconds.  

2.  dAt / StO: Prints stored data from memory. This function lets you print all the 

memorised data from memory previously stored in the meter. Each set of 
stored data will be send for printing based on preset timing from 0 to 30 
seconds. 

 

From Coductivity or TDS measurement mode.