Lowrance airmap Manual Do Utilizador
65
right or left arrow key until the desired number appears. Press the EXIT
key when you’re finished.
key when you’re finished.
SERIAL COMMUNICATIONS SETUP
To set the data port, highlight the “Serial Com
Setup” on the System Setup menu. Press the right
arrow key. The screen shown at right appears.
To set the data port, highlight the “Serial Com
Setup” on the System Setup menu. Press the right
arrow key. The screen shown at right appears.
Check your DGPS receiver’s manual for the proper
data settings. Highlight the menu item you need to
change. Press the left or right arrow keys to change
them. The serial port defaults are 4800 baud, no
parity, and 8 data bits. Press the EXIT key to erase this menu.
data settings. Highlight the menu item you need to
change. Press the left or right arrow keys to change
them. The serial port defaults are 4800 baud, no
parity, and 8 data bits. Press the EXIT key to erase this menu.
RESET OPTIONS
To return the AirMap to its original factory settings, press the up or down
arrow keys until the “Preset Options” menu on the System Setup screen
is surrounded by the black box. Now press the right
arrow key. A message appears, asking if you want
to restore the original options. Press the left arrow
key if you do, the right arrow key to quit.
To return the AirMap to its original factory settings, press the up or down
arrow keys until the “Preset Options” menu on the System Setup screen
is surrounded by the black box. Now press the right
arrow key. A message appears, asking if you want
to restore the original options. Press the left arrow
key if you do, the right arrow key to quit.
If you restore the unit to the factory settings, all
options such as battery level and delay, contrast,
alarms, and other system choices are returned to
their default values. However, no waypoints, routes,
or icons are erased.
options such as battery level and delay, contrast,
alarms, and other system choices are returned to
their default values. However, no waypoints, routes,
or icons are erased.
RESET GROUPS
To return all programmed window groups and boxes on the navigation
screens and MAP-3 to their factory defaults, highlight “PRESET GROUPS”
on the System Setup menu and press the right arrow key.
To return all programmed window groups and boxes on the navigation
screens and MAP-3 to their factory defaults, highlight “PRESET GROUPS”
on the System Setup menu and press the right arrow key.
SYSTEM INFO
The system information screen shows the release date and the version
number of the code stored inside the AirMap. To
view this screen, highlight the “System Info” label
on the System Setup menu. Now press the right
arrow key. A screen similar to the one at right ap-
pears. Press the EXIT key when you’re finished
reading this screen.
The system information screen shows the release date and the version
number of the code stored inside the AirMap. To
view this screen, highlight the “System Info” label
on the System Setup menu. Now press the right
arrow key. A screen similar to the one at right ap-
pears. Press the EXIT key when you’re finished
reading this screen.
(Your code version and date may differ from the
one shown at right.)
one shown at right.)