Lowrance airmap Manual Do Utilizador
3
BATTERY INSTALLATION
The AirMap requires six AA batteries. We recommend DURACELL
The AirMap requires six AA batteries. We recommend DURACELL
®
alka-
line batteries, but other brands will work. You can use lithium batteries
which will last longer than alkaline batteries (but cost more) or recharge-
able ni-cad batteries (won’t last as long as standard alkalines). Recharge-
able alkaline batteries such as RayOVac
which will last longer than alkaline batteries (but cost more) or recharge-
able ni-cad batteries (won’t last as long as standard alkalines). Recharge-
able alkaline batteries such as RayOVac
®
Renewals
®
will also work .
Do not use heavy-duty batteries or any battery other than the ones listed
above. Do not mix different types of batteries. (For example, don’t use
both alkaline and ni-cad batteries at the same time.)
above. Do not mix different types of batteries. (For example, don’t use
both alkaline and ni-cad batteries at the same time.)
To install the batteries, first turn the AirMap so that it is facing you. Now
grasp the bottom part of the case and push it to the right until it comes
grasp the bottom part of the case and push it to the right until it comes
completely off the unit. The bottom
part of the case holds the batteries.
Next, push the battery holder out the
bottom of the battery cover as
shown below. Install each battery
with the negative end (-) against the
spring. The positive end (+) of each
battery should be firmly against the
metal plate. When all six batteries
are installed, slide the battery holder
into the battery cover.
part of the case holds the batteries.
Next, push the battery holder out the
bottom of the battery cover as
shown below. Install each battery
with the negative end (-) against the
spring. The positive end (+) of each
battery should be firmly against the
metal plate. When all six batteries
are installed, slide the battery holder
into the battery cover.
If the battery holder sticks when slid-
ing into the battery cover, apply a
thin film of petroleum jelly to the “O”
rings on the battery holder.
ing into the battery cover, apply a
thin film of petroleum jelly to the “O”
rings on the battery holder.