lawrence replacing a plastic spline with a zinc spline Manual Do Utilizador
TOOLS REQUIRED:
• Phillips head screwdriver
• Slide Bar
• Metal Spline
• Slide Bar
• Metal Spline
INSTRUCTIONS:
Step 1
Determine which spline to change. Tighten all the
other splines.
Determine which spline to change. Tighten all the
other splines.
Step 2
Loosen up the spline, take slide bar and lightly tap
spline from the top.
Loosen up the spline, take slide bar and lightly tap
spline from the top.
Step 3
Remove and Replace with metal spline
Remove and Replace with metal spline
Step 4
Slide in spline and fit into place, gently tap spline with
slide bar until spline pops into place.
Slide in spline and fit into place, gently tap spline with
slide bar until spline pops into place.
Step 5
Line up spline and replace screw, must be screwed in
firmly.
Line up spline and replace screw, must be screwed in
firmly.
Step 6
Turn over and follow instruction in order to replace
another spline.
Turn over and follow instruction in order to replace
another spline.
Note:
Replace one spline at a time. Do not loosen
more tahn one spline at a time..
Replacing Plastic Splines with Metal
Splines
Tools
Step 1 & Step 2
Step 4 & Step 5
Step 3
Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: 631.666.0336 • www.lawrencemetal.com
e-mail: service@lawrencemetal.com • PO Box 400 • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA