jazzmutant lemur Manual Do Utilizador
25
• Click OK to close the window.
Using a Lemur in a Local Area Network
Your local area network can use either a switch or a router. A router typically assigns
network addresses to each device using a DHCP (dynamic host control protocol) server.
Many people use wireless routers, which include both Ethernet ports and a wireless
connection. If you use a wireless router to connect to the Internet, you can connect your
Lemur to the router and access your Lemur wirelessly.
network addresses to each device using a DHCP (dynamic host control protocol) server.
Many people use wireless routers, which include both Ethernet ports and a wireless
connection. If you use a wireless router to connect to the Internet, you can connect your
Lemur to the router and access your Lemur wirelessly.
Using a Router
First, we’ll examine the case where your computer is already connected using a router
which provides your computer with its IP address, and you would like to connect your
Lemur to this same router.
which provides your computer with its IP address, and you would like to connect your
Lemur to this same router.
The instructions for this case are exactly the same for Mac OS X and Windows, because
they don’t involve you touching the computer at all!
they don’t involve you touching the computer at all!
• Connect your Lemur to the router by connecting one end of a network cable to the
Ethernet jack on the back of the Lemur, and the other end to an Ethernet input jack on
the router.
the router.
• After you see the yellow Lemur, press the Settings button on your Lemur. You’ll
likely see something like this: