Casio exilim ex-zr20 Manual Do Utilizador

133

Printing

.

Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.

• The camera does not draw power over the USB cable. Check the battery level 

before connecting and make sure it is not too low.

• Make sure that you insert the cable connector into the USB/AV port until you feel it 

click securely into place. Failure to insert the connector fully can result in poor 
communication or malfunction.

• Note that even while the connector is fully inserted, you still 

will be able to see the metal part of the connector as shown 
in the illustration.

• When connecting the USB cable to a USB port, make sure 

you align the connector correctly with the port.

• Make sure that the camera is turned off before plugging in or 

unplugging the cable. Check the user documentation that 
comes with the printer for information about requirements 
before plugging into or unplugging from the printer.

USB

USB cable (included with camera)

USB port

[USB/AV] port

Making sure that the 6 mark on the camera is aligned 
with the 4 mark of the USB cable connector, connect 
the cable to the camera.

Large connector

Small connector

Terminal cover