Kofax vrs4 Manual Do Utilizador
Operating VRS
VRS User’s Manual
105
Rotation Tab
The Rotation tab consists of options for front side and back side rotation. When a
scanner supports duplex scanning, the front side and/or the back side of a scanned
image can be rotated by 90, 180, or 270 degrees. Selecting 0 means no rotation. On
simplex scanners, only front side rotation is enabled.
Figure 3-47. Advanced Properties Dialog Box – Rotation Tab
When an image is displayed in the VRS Interactive Viewer, the image displays at the
rotation angle plus the angle set on the Skew panel. Furthermore, any rotation in
ImageControls-based applications is independent of (and performed after) the
rotation set from the Rotation tab. Rotation tab settings apply after deskew, crop, and
settings from the Picking Rectangle tab. In other words, image-processing tasks will
occur in this order:
• VRS deskew (if enabled)
• VRS crop (if enabled)
• Settings from Picking Rectangle tab on the Advanced Properties dialog box
• Settings from Rotation tab on the Advanced Properties dialog box
• VRS crop (if enabled)
• Settings from Picking Rectangle tab on the Advanced Properties dialog box
• Settings from Rotation tab on the Advanced Properties dialog box
Note
The rotation options on this tab may conflict with the VRS content-based
rotation feature, which is enabled by selecting the Auto Orientation check box from
the VRS Skew panel. For best results, do not select the Rotation tab options and the
Auto Orientation option at the same time.