Kofax vrs4 Manual Do Utilizador

Operating VRS

VRS User’s Manual

When exceptions occur while QC Later mode is in effect, the VRS Interactive Viewer 

will remain out of view until it is invoked from the Ascent Capture application. This 

mode is available to users who are licensed to use VRS in an Ascent Capture 7.0 

installation. For more information, refer to the Ascent Capture online help or the 

Getting Started with Ascent Capture guide. 

Use the Hardware Warnings option to specify how VRS should respond to hardware 

conditions such as Paper Jam, Out of Paper, and Cover Open. Selecting the Hardware 

Warnings option means that you are choosing to handle these errors exactly as 

defined by the “Action” settings in the VRS Administration Utility. When this option 

is not selected, it is the equivalent of choosing “Return Error” as the action for all 

hardware error conditions in the VRS Administration Utility. Refer to Table 3-5 on 

If you selected VRS Non-Interactive mode during the installation process, your 

default QC Mode is Disabled and the default value of the Hardware Warnings setting 

is off (not checked). VRS Non-Interactive mode only applies to certain scanners. For 

more information, refer to VRS Non-Interactive Mode on page 113.

X To change the operating mode

Right-click on the VRS taskbar icon.

From the VRS taskbar menu, select QC Modes.

From the QC Modes submenu, select the desired operating mode. A check 

mark will appear next to your selection.

Proceed with your scanning session.

With VRS, you can scan documents and accurately capture data in the shortest time 

possible using the default settings. These default settings have been carefully chosen 

to allow VRS to excel at a wide range of documents without adjustments. However, 

some document types may pose a challenge and they may require custom 

adjustments. If you expect to work with a high volume of problematic or challenging 

documents, the best solution may be to create a profile that contains custom settings.