opcode studio 4 Manual Do Utilizador

Studio 4 menu, choose any Studio 4 on a 
modem port to open the Routing, Chan-
nelizing and Muting window for the 
modem port. Choose any Studio 4 on a 
printer port to open the Routing, Channel-
izing and Muting window for the printer 
port. If a network has only one Studio 4, 
its RCM window uses only the 8x8 grid. If 
a network contains two Studio 4's, its 
RCM window uses the entire grid.

MIDI muting allows you to mute notes, 
program changes, mono or polyphonic 
aftertouch, pitch bend, controllers, active 
sensing, beat clock, timecode, system 
exclusive and miscellaneous system 
events at either the Studio 4's input or its 
output.

This is very useful for thinning the MIDI 
data stream by muting unused or undes-
ired MIDI messages.

NOTE: Beat clock messages include Song 
Position Pointer, Song Select, Timing 
Clock, Start, Stop and Continue messages. 
Miscellaneous system events include Tune 
Request, System Reset and undefined MIDI 
status bytes 0xF4, 0xF5, 0xF9, and 0xFD.

Use the horizontal MIDI muting row (des-
ignated by an “M”) to mute MIDI 
messages arriving at the Studio 4 MIDI 
inputs. Use the vertical MIDI muting 
column

 to mute MIDI messages leaving 

the Studio 4 MIDI outputs.

StudioÊ4 Input 

Muting Row

StudioÊ4 Output 

Muting Column