sentrol zxled12 Manual Do Utilizador

14

When you turn the system ON with Force-Arming, the system will not
turn ON any zones that are not ready.  Once the zone is secured, that
zone is automatically turned ON and will cause an alarm if it is violated.
The LED of a zone that is not ready will be lit.  See Protection Zones for
a list of zone locations.

1.

Press

  ,

     , or                .

2.

Enter passcode:                                                        .

3.

Within 5 seconds, press the same key that was pressed in Step 1
above.

NIGHT

STAY

AWAY

Your system may be programmed to quickly turn ON using either the
two button method or the double press method.

The two button method allows you to quickly turn your system ON by
pressing the AWAY, STAY, or NIGHT key and then pressing the Enter
key.

The double press method allows you to quickly turn your system ON by
pressing the AWAY, STAY, or NIGHT key twice.

This feature allows your system to turn ON automatically ten (10)
minutes after you leave the premises and no other activity is detected.
Your Control Station will sound an audible warning at two (2) minutes
and one (1) minute before the system turns ON.  See ZX400/ZX410
Programming - Cancelling Exit-ON For Today for instructions on how
to cancel this feature for the day.