sentrol zxled12 Manual Do Utilizador
33
Programming the Latch Key Feature
This feature allows you to monitor the entry of a designated person.
The system will look for that user’s passcode to be used on the selected
day(s) during the programmed time frame. During that time frame,
the Control Station will chime once a minute until that person’s
passcode is entered or the time frame has expired. The system will send
a report if the user’s passcode was not entered during the scheduled
time on the scheduled day. Contact your Security Company Represen-
tative for more details.
The system will look for that user’s passcode to be used on the selected
day(s) during the programmed time frame. During that time frame,
the Control Station will chime once a minute until that person’s
passcode is entered or the time frame has expired. The system will send
a report if the user’s passcode was not entered during the scheduled
time on the scheduled day. Contact your Security Company Represen-
tative for more details.
There are five items to be programmed:
A. Setting the user passcode ID to be monitored
B. Day(s) of week to monitor
C. Time frame for the days that the user passcode must be entered
D. Hour to monitor each day
E. Minute to monitor each day
B. Day(s) of week to monitor
C. Time frame for the days that the user passcode must be entered
D. Hour to monitor each day
E. Minute to monitor each day
A. Setting the Latch Key User ID to be Monitored
1.
Press .
2.
Enter passcode: .
The Ready and Trouble LEDs will flash.
3.
Press .
4.
Press
(for location 1).
5.
Press .
6.
Enter User ID
(0 - 50, where 0 disables Latch Key
Monitoring).
7.
Press
to save selection and return to the location prompt.
OPTIONAL FEATURES
ZX400/ZX410 PROGRAMMING
ENTER
1
4
9
ENTER