sentrol zxlcd Manual Do Utilizador
17
Force-Arming -
(DO NOT enable for UL Listed Systems)
When you turn the system ON with Force-Arming, the system will not
turn ON any zones that are not ready. Once the zone is secured, that
zone is automatically turned ON and will cause an alarm if it is violated.
See Operating Your System - System Not Ready, to identify zones that
are not ready.
turn ON any zones that are not ready. Once the zone is secured, that
zone is automatically turned ON and will cause an alarm if it is violated.
See Operating Your System - System Not Ready, to identify zones that
are not ready.
1.
Press
,
or .
The Control Station will display selection:
2.
Enter passcode:
The Control Station will display:
3.
Within 5 seconds, press the same key that was pressed in Step 1
above. The Control Station will briefly display:
above. The Control Station will briefly display:
Turning Your System ON Using Two Button/
Double Press
Double Press
Your system may be programmed to quickly turn ON using either the
two button method or the double press method.
two button method or the double press method.
The two button method allows you to quickly turn your system ON by
pressing the AWAY, STAY, or NIGHT key and then pressing the Enter key.
pressing the AWAY, STAY, or NIGHT key and then pressing the Enter key.
The double press method allows you to quickly turn your system ON by
pressing the AWAY, STAY, or NIGHT key twice.
pressing the AWAY, STAY, or NIGHT key twice.
TO ARM AWAY
ENTER PASSCODE
ENTER PASSCODE
CANNOT ARM
AREA 1
FORCE ARM AWAY
FORCE ARM AWAY
NIGHT
STAY
AWAY
OPTIONAL FEATURES
O
P
TIO
N
E
N
A B L
E
D
O
P
TIO
N
E
N
A B L
E
D
FORCE ARM AWAY
ZX200/ZX210
ZX400/ZX410/ZX440F