sentrol zxlcd Manual Do Utilizador
40
Programming the Latch Key Feature
This feature allows you to monitor the entry of a designated person’s
passcode. The system will look for that passcode to be used on the
selected day(s) during the programmed time frame. During that time
frame, the Control Station will chime once a minute until that passcode
is entered or the time frame has expired. The system will send a report
if the passcode was not entered during the scheduled time on the
scheduled day. Contact your Security Company Representative for
more details.
passcode. The system will look for that passcode to be used on the
selected day(s) during the programmed time frame. During that time
frame, the Control Station will chime once a minute until that passcode
is entered or the time frame has expired. The system will send a report
if the passcode was not entered during the scheduled time on the
scheduled day. Contact your Security Company Representative for
more details.
There are five items to be programmed:
A. Setting the user passcode ID to be monitored
B. Day(s) of week to monitor
C. Time frame for the days that the user passcode must be entered
D. Hour to monitor each day
E.
B. Day(s) of week to monitor
C. Time frame for the days that the user passcode must be entered
D. Hour to monitor each day
E.
Minute to monitor each day
A. Setting the Latch Key User ID to be Monitored
To program the Latch Key feature:
1.
Press
. The Control Station will display:
2.
Enter passcode:
The Control Station will display:
3.
Press
. The Control Station will display:
4.
Press
(for location 1).
LOCATION: 00
VALUE: ---
VALUE: ---
TO PROGRAM
ENTER PASSCODE
ENTER PASSCODE
SELECT PROGRAM
OPTION 1-8
OPTION 1-8
ZX400/ZX410/ZX440F PROGRAMMING
9
4
1