Plextor eyetv Manual Do Utilizador
EyeTV Manual
Chapter 5 · Programs Window
20
Fine Tuning Edits
In order to find a good start or end for your clip within a recording, EyeTV
offers the following navigational aids to assist you in “drilling down” to the best
location:
offers the following navigational aids to assist you in “drilling down” to the best
location:
• Drag the Playhead with your mouse to roughly go to where
you want to edit. Use the spacebar to play/pause the video.
• When you are close to the spot you want to cut, press the
Add Marker button. This adds a pair of markers that start at
the current position.
the current position.
• Note that the playhead is connected to the marker with a
violet bar. This means that the playhead is now locked to the
marker.
marker.
• Drag the left hand marker to the approximate beginning of
your cut. Notice the playhead following the marker. Click on a
thumbnail to move both the marker and playhead to it, or use
the left/right arrow keys. If you need more detail, change the
resolution to Fine, then click on the desired thumbnail to mark
the exact beginning of your cut.
thumbnail to move both the marker and playhead to it, or use
the left/right arrow keys. If you need more detail, change the
resolution to Fine, then click on the desired thumbnail to mark
the exact beginning of your cut.
• Repeat the last step with the right hand marker to find the
exact end of your cut.
• If you need to manually drag the playhead during this
operation, e.g. for large-scale navigation, the marker-
playhead lock will come apart. To enable the marker-playhead
lock again, click on either the left or right marker of the pair.
The playhead will snap to that marker and the violet bar
designates the lock.
playhead lock will come apart. To enable the marker-playhead
lock again, click on either the left or right marker of the pair.
The playhead will snap to that marker and the violet bar
designates the lock.